General

Specifications

General
PowerSaver
Preset Timing Modes

Specifications

General

General
Model Name	SyncMaster 2233RZ

LCD Panel
Size	22 inch (55 cm)
Display area	473.76 mm (H) x 296.1 mm (V)
Pixel Pitch	0.282 mm (H) x 0.282 mm (V)

Synchronization
Horizontal	30~135 kHz
Vertical	56~75 Hz,120Hz

Display Color
16.7 M

Resolution
Optimum resolution	1680x1050@120 Hz
Maximum resolution	1680x1050@120 Hz

Input Signal, Terminated
DVI(Digital Visual Interface) Compliant Digital RGB 75 Ω± 10 %

Input Signal, Terminated

DVI(Digital Visual Interface) Compliant Digital RGB

75 Ω± 10 %

Maximum Pixel Clock
245 MHz (Digital)

Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz

Signal Cable
DVI-D to DVI-D connector, Detachable

Dimensions (W x H x D) / Weight (Simple Stand)
516.8 x 372.7 x 71.2 mm ( 20.3 x 14.7 x 2.8 inch) (Without Stand) 516.8 x 421.3 x 208.7 mm ( 20.3 x 16.6 x 8.2 inch) (With Stand) / 5.2 kg ( 11.5 lbs)

Dimensions (W x H x D) / Weight (Simple Stand)

516.8 x 372.7 x 71.2 mm ( 20.3 x 14.7 x 2.8 inch) (Without Stand)

516.8 x 421.3 x 208.7 mm ( 20.3 x 16.6 x 8.2 inch) (With Stand) / 5.2 kg ( 11.5 lbs)

VESA Mounting Interface
100 x 100 mm

Environmental considerations
Operating	Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing
Storage	Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing

Environmental considerations

Operating

Temperature : 50°F ~ 104°F (10°C ~ 40°C)

Humidity : 10 % ~ 80 %, non-condensing

Storage

Temperature : -4°F ~ 113°F (-20°C ~ 45°C)

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 5,292,000.

Dot Acceptable

TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.

For example, the number of TFT-LCD sub pixels contained in this product are 5,292,000.

Note

Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)